Why Does Laminate Gap? Causes and Simple Fixes

A narrow line appearing between laminate boards can spoil the clean, finished look of a room surprisingly quickly. So, why does laminate gap when it looked perfectly tight after fitting? Usually, it is because the floor has moved with changes in temperature or moisture, or because one part of the installation is preventing it from moving as intended. The good news is that many gaps are preventable, and the right fix depends on what is causing them.

Laminate is a practical, attractive choice for busy homes, rental properties and offices. It gives the look of wood at a more manageable price, is straightforward to maintain, and comes in styles for everything from light modern bedrooms to hard-working hallways. But it is still a floating floor, which means it needs room to respond naturally to its surroundings.

Why does laminate gap between the boards?

Laminate planks click together to create a continuous surface, but they are not glued directly to the subfloor. Instead, the entire floor sits and moves as one large panel over its underlay. When conditions change, the core of the boards can expand or contract slightly.

In a warm, dry room, laminate may contract. This can reveal small gaps at the short ends or along the long edges of boards. In more humid conditions, the boards may expand instead. If there is not enough room around the perimeter, the floor can push against walls, door frames or kitchen units and may lift, bow or force joints apart elsewhere.

A tiny seasonal change is not always a sign of poor-quality flooring. A persistent gap, a gap that gets wider, or boards that feel loose underfoot deserves closer attention. It can point to an installation issue, moisture exposure or an unsuitable subfloor.

The most common causes of laminate gaps

The flooring was not acclimatised

Before fitting, laminate should be left unopened in the room where it will be installed for the manufacturer’s recommended period, often at least 48 hours. This allows it to adjust to the room’s normal temperature and humidity.

If cold boards are brought in from a van or storage area and fitted straight away, they may change size once the heating is on and the room settles. That movement can put pressure on the click joints or create gaps as the boards contract. Acclimatisation is a simple step, but it makes a real difference to a stable finish.

There is not enough expansion space at the edges

Every laminate floor needs an expansion gap around the perimeter. This small space is normally hidden beneath skirting boards, beading or door trims, so it does not affect the finished appearance. The precise allowance varies by product, but fitters commonly work to the manufacturer’s guidance, often around 8-12mm.

Problems occur when laminate is fitted tightly against a wall, fireplace hearth, radiator pipe, kitchen island or doorway. The floor has nowhere to move, so pressure builds. You may see peaked joints, lifting near a doorway, or gaps opening at the opposite side of the room.

It is also worth checking transitions between rooms. A large continuous run of laminate may need an expansion profile at doorways or at intervals specified by the manufacturer. Skipping this detail can leave the floor under strain.

The click joints were not fully engaged during fitting

Laminate boards need to be connected cleanly and at the correct angle. A little dust in the joint, a damaged tongue, an uneven strike or forcing a board into place can leave a connection that looks acceptable at first but later starts to separate.

This type of gap is often localised. It may appear in just one or two places rather than across the whole room, and the affected board can sometimes move when stepped on. Damaged locking edges cannot always be repaired invisibly, so replacing the affected plank may be the tidiest long-term answer.

The subfloor is uneven or moving

A floating floor needs a firm, level base. If the concrete, floorboards or existing subfloor beneath it has dips, ridges or flex, laminate can bend slightly as people walk over it. Over time, that repeated movement stresses the click system and can pull joints apart.

Underlay helps with minor imperfections, sound reduction and comfort, but it is not a cure for a badly uneven floor. Using very thick or overly soft underlay can also allow too much movement. Proper preparation may mean levelling a concrete floor, securing loose timber boards, or choosing an underlay approved for the laminate being fitted.

Water and humidity have affected the boards

Most laminate is designed to cope with everyday splashes when they are wiped up promptly. It is not designed to have water sitting in its joints, especially around external doors, washing machines, pet bowls or bathroom thresholds.

Moisture can cause the fibreboard core to swell. Once swollen, the boards may not return fully to their original shape, leaving raised edges, weakened joints and visible separations as the floor dries. Steam mops and soaking-wet mops can create the same problem, even when there has not been an obvious spill.

For rooms with frequent water exposure, such as bathrooms, utility rooms or busy entrances, sheet vinyl or LVT can be a better practical choice. The best option depends on the room, the product specification and how the space is used.

Heavy fitted items are trapping the floor

Laminate should not be pinned down by fixed kitchen units, islands, heavy built-in wardrobes or door frames fitted on top of it. This stops the floor floating freely. As it expands and contracts, the trapped section can force movement into the surrounding boards.

Freestanding furniture is usually fine, but exceptionally heavy items can still affect a large floating floor. Felt pads beneath chair legs and furniture feet are useful for preventing scratches and reducing stress during day-to-day movement.

Is a gap around the edge of laminate normal?

Yes, provided it is an intentional expansion gap and is covered neatly by skirting or beading. This is very different from a gap between the planks themselves. The perimeter gap gives the floor breathing room; a gap in the middle of the floor means the joints have separated or the floor has shifted.

If you have recently removed skirting, replaced a threshold strip or moved fitted furniture, you may simply be seeing the expansion space that was always there. It should be concealed again rather than filled with rigid grout, adhesive or silicone that could prevent movement.

How to fix laminate gaps safely

The right repair starts with finding the cause. Pushing a board back together may close the line temporarily, but it will not solve a moisture problem, uneven subfloor or missing expansion gap.

For a small gap near a wall, a fitter may be able to remove the skirting or beading and use a flooring pull bar to draw the row back into position. This is best done carefully, as hitting or levering laminate can chip the edges. If the gap keeps returning, the perimeter space, subfloor and nearby fixed objects need checking.

For a gap in the centre of the room, boards may need to be lifted back to the nearest wall so the affected plank can be reconnected or replaced. This is often more involved than it sounds, particularly if the floor runs beneath door architraves or through several rooms. A professional inspection can prevent a small repair becoming a damaged row of boards.

Avoid filling laminate gaps with wood filler, sealant or glue unless the flooring manufacturer specifically advises it. These products can look patchy, collect dirt and restrict the natural movement a floating floor needs. They may also make future repairs harder.

Keeping your laminate floor looking its best

A stable indoor environment helps. Try to avoid dramatic changes in heating and humidity, particularly in rooms that are left cold for long periods and then heated quickly. Wipe up spills promptly, use a well-wrung microfibre mop rather than a soaking mop, and place mats by external doors to catch rain, grit and damp shoes.

When choosing new laminate, do not focus on colour alone. Consider the room’s traffic, exposure to moisture, subfloor condition and whether the flooring will continue through doorways into other spaces. A beautiful oak-effect finish still needs the right preparation and fitting to stay beautiful.

If you are noticing recurring gaps, lifting or movement underfoot, arrange for the floor to be assessed before replacing random boards. Quick Flooring can measure your space at home, talk through laminate, LVT and vinyl options, and make sure the preparation and fitting suit the way your household or workplace really uses the room. A well-planned floor should feel solid, look smart and let you enjoy the room rather than keep watching the gaps.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top